Pulp and Paper Mill


	Select plants from the drop down box:


		Complete Pulp & Paper Mill

	Major process units woodroom bark handling system chip screenin kamyr hardwood digester brown stock washing and screening clo2 generation (pac process) bleach plant noodle and wet lap pulp presses caustic plant and lime kiln pulp mill refiners recovery black liquor system power plant steam system dimineralized water system coal handling system solods reclaim system primary joint waste treatment mill water system pulp preparation paper machines (5)

Plant 2

Complete 35,000 ton/yr paper mill producing fluting and testliner base on 100% recycle

Plant 3 - Complete 30,000 ton/yr paper mill from recycle - PM3 MF basic specification

Annual Capacity:

21 000 tons

Substance Range:

80 - 400 g/m2.

Machine trim :

2100 - 2280 mm.

Reel widths :

120 - 2280 mm. Tolerance +/- 1 mm.

Reel diameters :

600 - 1400 mm
(Diameter also depending of total reel weight)

Core diameters :

72, +/- 0,3 mm.
76, +/- 0,3 mm.
101, +/- 0,3 mm.
120, +/- 0,5 mm.
152, +/- 0,5 mm.
203, +/- 0,5 mm.
(305, +/- 0,5 mm can be delivered at price extra)

Max 13 reels pr set, in mix of wide and narrow reels. Joints to be made overlapping with two sided tape. Max 3 joints pr reel.

PM4 basic specification

Joints to be made overlapping with two sided tape. Max 3 joints pr reel.

Annual Capacity:	14 000 tons
Substance Range:	35 - 100 g/m2.
Machine trim :	3380 mm (3400 mm dependent on quality/ substance)
Reel widths :	120 - 2280 mm. Tolerance +/- 1 mm.
Reel diameters :	600 - 1400 mm (Diameter also depending of total reel weight)
Core diameters :	72, +/- 0,3 mm. 76, +/- 0,3 mm. 120, +/- 0,5 mm. 152, +/- 0,5 mm.
Max Reels	pr set: 16 (in mix of wide and narrow reels)


	copyright® Industrial Asset Management - All Rights Reserved