Plant 1 - 500 M3/day (100 million ft2/yr) - Feed – Wood chips

Major Equipment:

• Phelps trailer unloading system
• Conveying system to process or storage
• 300hp rework Hammer Mill
• (5) Rotex Screeners
• (4) Rotary Dryers, 3m x 10m, triple pass – gas, oil or wood dust fired
• (3) Pallman Refiners type PSKM15, 300hp
• (6) Bauer Refiners, Size 36, 200hp
• Urea Formaldehyde Resin storage system
• (2) Littleford Blenders, Model EK60
• Bison Former – 2 face pockets, 2 core pockets for 1.5m x 5m size
• Washington Iron Works Prepress – single opening
• Washington Iron Works Press, 16 Daylight, 1.5m x 5m
• Board Cooler – 48 capacity
• Jenkins Panel Saw
• Kimwood 6 head Sander
• Utilities
• Spares and complete documentation

            
    

Plant 2 - 60 cubic meters per day, on ¾ inch (19mm) thick basis - Immediately Available on first-come, first-served basis.

A brief description of the plant

• 2 flakers make Hombak U – 28
• 2 Driers, one with steam, and one with diesel burning, make Guttner
• 1 screen make Allgaier
• 1 Hammer Mill, Alpine
• 1 Gluing machine, Lodige
• Forming station is a twin Würtex, Reconditioned and improved in 1995
• 4 daylight press, Friz – Dieffenbacher, size 1.450 x 3.600 mm, reconditioned in 1995
• 1 Cut to size Saw, Bottcher & Gessner
• 1 Sander, make Kimwood.

All equipment is in good working order and can run today for demonstration, if desired. Has complete line of spare parts, and accessories. Part of the electrical micro switches was changed to magnetics.

Location: South America

Replacement cost $2.1 million USD

Offered at $475,000 USD on ‘as is, where is’ basis