IAM Stock no.

Description

7908-04

Yorke Chiller. York International Chilling system, max working pressure high and low side 20.7 barg, contract #18/9010792, refrigerant NH3 (R717), refrigerant charge 650 kg, max speed 2960 rpm, unit identification 'C', Major components consist of the following: (1) Frick model TDS-233L twin rotary screw compressor, operating speed 2960, design pressure 24.1 barg, driven by 315 kw, 3/50/415 volt, 2960 rpm Exn motor, (1) 54.32 m3/hr Frick refrigerant shell and tube condenser, 20" O.D x 15' long, 120 tubes, design pressure tube side 10.34 barg + full vac @ -28.9/+93.3 deg C, shell side 20.7 barg + full vac @ -28.9/+93.3 deg C, 8 pass on tube side, single pass shell side, (1) Frick refrigerant flash economiser, 12 3/4" O.D x 12' long, design pressure 20.7 barg + full vac @ -28.9/+93.3 deg C, working pressure 1.86 barg @ -10.3 deg C, (1) 135.7 m3/hr Frick refrigerant shell and tube evaporator, 30" O.D x 18' long, 298 tubes, design pressure tube side 10.34 barg + full vac @ -42.8/+93.3 deg C, shell side 20.7 barg + full vac @ -42.8/+93.3 deg C, 6 pass tube side, single pass shell side , (1) Frick shell and tube oil cooler, 16" O.D x 10' long, design pressure tube side 20.7 barg + full vac @ -28.9/+93.3 deg C, shell side 10.34 barg + full vac@ -28.9/+93.3 deg C, (1) Frick oil separator/reservoir, horizontal, 3-stage design, final stage with Coalescent elements, design pressure 20.7 barg + full vac @ -28.9/+93.3 deg C,unit with Heatrae oil heater, type flameproof Immersion, model FP-C/3S/25, rating 1 kw, (1) Frick knockout vessel, 24" O.D x 11' long, design pressure 20.7 barg + full vac @ -42.8/+93.3 deg C, working pressure 0.04 barg @ -32.56 deg C, (1) Frick oil rectifier vessel, 10" O.D x 42" long, design pressure 20.7 barg + full vac @ -42.8/+93.3 deg C, working pressure 0.04 barg @ -32.56 deg C,

7906-00

Ingersoll-Rand Steam Turbine Driven Compressor with Spare Rotors. Includes: Compressor Stage 1, 2, 4, 3; Steam Turbine; Intercooler 1 and 2 with spare bundles; Lube Oil System. 44,450 CFM @ 134 PSI Used Compressor Train includes: Compressor - Speed 8200 rpm, Drive power 9020 HP, Disch. Press. 120 psig, Temp. Out 345 F, 4 Stages, Capacity to Process 36,739 SCFM (dry) (SCFM 14.7 psia & 60 F), Capacity (including air) 44,455 CFM. Stage 1 (with spare rotor): 1st critical speed 10,320 rpm, Max Temp 450 F, Max Oper. Press. 30 psig. Stage 2, 4, 3 (with spare rotor): 1st critical speed 5700 rpm, 2nd critical speed 12,900 rpm, Max Temp. 450 F, Max. Oper. Press. variable to 120 psig. Steam Turbine: Speed 8200 rpm, normal HP 1130 HP, Start-up HP 3000 HP, Steam In. 250 psig, Steam Temp. 406 F, Start-up steam 47,600 lbs/hr, Normal steam 12,700 lbs/hr, Start-up Ex. Press. 9" Hg absolute, Normal Ex. Press. 3" Hg abs., No. Stages 4 (with rotors, steam ejector, steam condenser). Cooling Water Data: Lube oil cooler 107 gpm, Surface condenser 1143 gpm, Start-up surface cond. 2350 gpm, No. 1 intercooler 610 gpm (with spare bundle), No. 2 intercooler 550 gpm (with spare bundle), Absorber 3120 gpm, Product cooler 205 gpm. Total Cooling Water: Normal 5735 gpm, Start-up 6942 gpm. Expander (Note: Missing Expander): Speed 8200 rpm, 8250 HP, Press. Inlet 85 psig, Temp. Inlet 1250 F, No. Stages 5, Disch. Temp. 640 F. Previous Use: Nitric Acid

7910-17

Atlas Copco air compressor, model GA75 V8D, rotary screw type, with air dryer, manufactured in Belgium,75 KW,built 2005,13 bar maximum pressure,2975 RPM,1680 kg.

7910-18

Atlas Copco air compressor, model GA75 Plus, rotary screw type, with air dryer, 75KW,Pressure max 7.5 Bar,1530 kgs,built 2006

7918-10

INGERSOL RAND PACKAGED AIR COMPRESSOR, SCREW TYPE, 150 HP, 150 PSI DISCHARGE PRESSURE, SERIAL NO. TNO612U09315, COMPRESSOR MODE NO. IRN150H-OF.

7908-126

Sulzer CO2 compressor, Model 4D-225-3A, inlet volume 1047ACFM, outlet pressure 554 psi, 325rpm, stoke 225, 2 stage, serial no. 6022, 750HP (no motor), plant no 12J1

7908-127

Sulzer CO2 compressor, Model 4D-250-3B, inlet volume 3400m3/hr, outlet pressure 39 kg/cm2, 420rpm, stoke 250, serial no. 6425, 1000HP (no motor), plant no 22J1A

7908-128

Sulzer CO2 compressor, Model 4D-250-3B, inlet volume 3400m3/hr, outlet pressure 39 kg/cm2, 420rpm, stoke 250, serial no. 6426, 1000HP (no motor), plant no 22J1B

7908-129

Sulzer CO2 compressor, Model 4D-250-3B, inlet volume 3355m3/hr, outlet pressure 40 kg/cm2, 420rpm, stoke 250, serial no. 6725, 1000HP (no motor), plant no 23J1C