IAM Stock no.

Description

7910-11

Drais bead mill - Stainless steel contact parts with solid stainless steel jacketted chamber approx 2.2M long x 1M dia. Model PM ST 1200 ,1200 liters,Built 2003, 355 KW, Chamber and jacket rated 3 Bar @ 70 deg C

7910-12

Netzsch bead mill Carbon steel jacketted chamber approx 2.2M x 1M dia with stainless steel lining, type LMK1000K , 1000 liters,Built 2004, 355 KW, serial No 2401197.

7910-13

Drais bead mill Carbon steel jacketted chamber approx 2.2M x 1M diameter with stainless steel lining, type PM1000 , TEX H ,1000 liter,Built 1984, Motor 315KW,380 volts, 50 HZ.

MICRON CARBON STEEL JET MILL.

Chicago RedHead 3P sand mill, 5hp, serial no. 8L12678

7890-11

One (1) Cowles Dissolver, stainless steel, Model VHLM5, 3600rpm, serial no. LA626, air over oil lift, with 20 gallon SS mixing pot on wheels, 3 phase, 60HZ, 230/460 V, 1996

75 HP in-line Schold Disperser Mill, 2900 rpm, serial no. S1637

7906-07

Used Nitric Acid Plant Ammonia Air Mixer (Converter Cone). Manufactured by Missouri Boiler and Tank Company, Stainless Steel. Rated 135 psi @ 650 F. Flg "A" 135 psi @ 550 F. Shell thickness 3/16" and 5/16". Head thickness 169 min, Head raidus 211. Serial # H-5235, National Board # 3133, Built 1971. Previous Use: Nitric Acid - Ammonia Air Mixer / Converter (Note: Converter and Converter Elbow not available but drawings are available)

7906-22

Used 46" Dia Brink System's Platinum Filter (Platinum Recovery). Dimensions: 46" ID x 1/4" thick x 7' 10" length, 110 psig @ 421 F operating. Outlet end provided with removeable coned-down spool with flanged outlet to match pipe to cooler condenser. Internal flange and support rack provided for holding cartridge type filter. Shell & internal fittings SA-240-304-L, Flanges SA-181-II, Gaskets 304 SS. Previous Use: Nitric Acid - Platinum Recovery Filter