IAM Stock no.

Description

7890-02

One (1) Nauta Mixer, approx 150 ft3, JH Day, 304 SS, 8 ft diameter x 12 ft, serial no 86-12, dual motor 15HP/2HP, single screw, serial no.89-12

One (1) 60 ft3 STRONG SCOTT CARBON STEEL DOUBLE RIBBON BLENDER, MODEL 1M60, SERIAL NUMBER 1868, 28 RPM. 60 CUBIC FT, 4'W X 3.5'H X 8'L, 7" CENTER BOTTOM OUTLET. GENERAL ELECTRIC MOTOR, MODEL 5K4256Y108, SERIAL NUMBER NV 44596, 10 HP, 208-220/440 VOLTS, 3 PHASE, FL RPM 1760/1465.

7910-14

Lödige Ringlayer mixer, CoriMix model CM350, hinged cover with counterbalance, designed for continuous operation, all 316SS with PTFE lining, ABB 55kw drive motor , serial no 16069-0, year 2008, Mixing chamber aprox 2M long a 0.5M diameter, skid mounted,top inlet 400x 300mm , bottom outlet 550mm x 300mm.

7910-15

Elmomet twin shaft paddle mixer, model SW-2/410-3000, all 316SS with polyethylene lining in inside of mixing chamber, mixing chamber 1.1m wide x 3m long x 0.7 deep, 33 rpm, 15 KW motor through Nord 90 degree gearbox, with hinged cover, serial no. 18-36, year 2008, mounted on a carbon steel frame,packed gland seals on shafts.

7910-16

Elmomet single shaft paddle mixer, 1m3 working capacity model SW1-1000, 146 rpm, all 316SS with PTFE lining, Siemens 110/127kw drive motor to Nord 90 degree gearbox, serial no. 18-37, year 2008, cylindrical 3.6M long x 1M diameter with 2 x hinged side doors,bottom outlet,mounted on carbon steel rectangular frame.

7921-21

USED LODIGE MODEL CB30P STAINLESS STEEL JACKETED RING LAYER MIXER. STAINLESS STEEL CHAMBER 80 LITRE WORKING CAPACITY. HAS CARBON STEEL JACKET 22 LITRE CAPACITY RATED 1.5 BAR DESIGN PRESSURE AT 50 DEGC. STAINLESS STEEL MIXING ELEMENTS BELT DRIVEN BY 24 KW 415 VOLT 3/50 1465 RPM MOTOR. MOUNTED ON MILD STEEL FRAME. THROUGHPUT 0.5-8 TPH DEPENDING ON PRODUCT.

UNUSED SABEL AUTOMATIC CASE PACKER MODEL SE-15 MODULAR. ORIENTS AND COLLATES WRAPPED BOTTLES OR BUNDLES OF 6 OR 12 BOTTLES ON ELEVATOR AND LOADS FROM BOTTOM INTO RLS ERECTED CASE, RATED TO 15 CASES PER MINUTE ON BUNDLES OF 400ML BOTTLES. TOP AND BOTTOM SEALS CASES WITH PRESSURE SENSITIVE TAPE. MAGAZINE FOR EMPTY CASES HOLDS 450 CASES. MACHINE HAS ORIENTER AND COLLATOR. CASE SIZE RANGE 234MM-424MM LONG X 127MM-326 MM WIDE X 137MM X 269 MM DEEP.

(1) KEMP MODEL 295-3 (PSN) NITROGEN GENERATOR-PRESSURE SWING ABSORBTION

MODULE, RATED CAPACITY 3000 SCFH @ 80 PSI DISCHARGE, 100-105 PSI INLET

PRESSURE. VESSEL RATED 150 PSI, NEW 1986.