IAM Stock no.

Description

7905-62

95 ft2 316SS plate heat exchanger, model ATP20-VC-20, 90 psi at 125 degF both sides, serial no.302754-2, NB rated no. 35737, made by Mueller, 2003

7905-63

95 ft2 316SS plate heat exchanger, model ATP20-VC-20, 90 psi at 125 degF both sides, serial no.302754-3, NB rated no. 35738, made by Mueller, 2003

7908-44

527 sq ft 316 SS Plate Heat exchanger Mfd by Alfa Laval,Model M15,MAWP 150psi@225 Deg F,and MDMT -20F@150 PSI,52 US Gallon capacity,8"inlet and outlet,NB#24305,S/N 30109-74961

7908-42

325 sq ft 304 SS spiral Heat exchanger Mfd by Alfa Laval,1995,100psi@150 Deg F,NB#15803,S/N 22211

USED APPROXIMATELY 250 SQUARE FOOT SHELL AND TUBE HEAT EXCHANGER. 12" DIAMETER, X 11' LONG. TITANIUM TUBE SIDE, FIXED TUBE SHEETS.

USED APPROXIMATELY 150 SQUARE FOOT SHELL AND TUBE HEAT EXCHANGER. 10" DIAMETER, X 10' LONG. TITANIUM TUBE SIDE, FIXED TUBE SHEETS. TUBES RATED 150 PSI/FULL VACUUM. SHELL RATED 150 PSI.

7902-3

One (1) 4500 ft2 (400m2) shell and tube heat exchanger, both shell and tubes sides are 347SS, U-tube design, type CEU, 347SS tubes, (367) U’s, 1”OD (25mm) x 16BWG x 24’ (7.3m) straight side. 1210 psi (80bar) at 810degF (432C) shellside, 1450 psi (95bar) at 775degF (412C) tubeside. 1 pass shell, 2 pass tubeside. Shell nozzles 16 inch (400mm) inlet and outlet, tubeside nozzles 16 inch (400mm) inlet and outlet. Horizontal with saddle supports. NB rated. Item E-246C. Built year 2006

7890-10

One (1) Premier Mill, model HML1.5, Pilot Plant Supermill, 5hp, mechanical seal, serial no. MML90940-90-0183, pump motor 0.33hp, 3 phase, 60HZ, 230V, 1996